MER type - Tilt & Cut type -
MER type uses Tilt-Off Mechanism to cut close to work.
In combination with Timing Unit (TU01), it is tilted to the side of the
molded product and cut closer
to the molded product.
Dimension
| Model | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U |
| MER-3 | 83 | 20 | 28 | 19 | 41 | 54 | 34 | 10 | 14 | 8.5 | 20.5 | 25 | M3 | M3 | 7 | 4.0 | 3.5-4 | 13 | 3 | 2 | 2.5 |
| MER-5 | 90 | 29 | 28 | 17 | 42 | 62 | 42 | 10 | 22 | 8.5 | 28.5 | 25 | M3 | M3 | 7 | 4.0 | 5.5-6 | 15 | 4 | 2 | 2.5 |
| MER-10 | 116 | 35 | 35 | 21 | 57 | 73 | 51 | 12 | 26 | 9 | 36 | 28 | M3 | M3 | 9 | 4.0 | 7-8 | 16 | 5 | 2 | 3 |
| MER-20 | 123 | 44 | 42 | 21 | 60 | 84 | 62 | 12 | 26 | 9 | 36 | 28 | M4 | M4 | 12 | 4.0 | 9-10 | 23 | 8 | 2 | 3 |
| MER-30 | 160 | 56 | 47 | 29 | 71 | 109 | 70 | 16 | 26 | 11 | 50 | 48 | M4 | M4 | 17 | 4.0 | 15-16 | 50 | 28 | 3 | 4 |
Specification
| Model | Cutting Capacity | Body length (mm) |
Weight (gram) |
Diameter φ(mm) |
Air Cons. (cm3 / stroke) |
Working Air Pre. (kgf / cm2) |
Stroke (mm) |
Applicable Blade |
Cutting Effect. Length (mm) | Blade Thickness (mm) | Blade Opening (Max. mm)±0.5 |
|
| MER-3 | Soft plastic | φ1.0 | 83 | 170 | 20 | 30 | 4-5 | 5 | F10E F10EK |
12 11 |
3 3.5 |
4.0 3.5 |
| MER-5 | Soft plastic | φ1.2 | 90 | 260 | 29 | 40 | 4-5 | 5 | F1E F1EK |
12 11 |
3 3.5 |
6.0 5.5 |
| MER-10 | Soft plastic | φ2.5 | 116 | 440 | 35 | 90 | 4-5 | 4 | F3E F3EK |
13 13 |
4.5 4.5 |
8.0 7.0 |
| MER-20 | Soft plastic | φ4.5 | 123 | 680 | 44 | 150 | 5-6 | 4 | F5E F5EK |
18 18 |
6 6 |
9.0 9.0 |
| MER-30 | Soft plastic | φ6.0 | 160 | 1400 | 56 | 300 | 5-6 | 3.5 | F9E F9EK |
39 39 |
8 8.5 |
15.0 15.0 |
Application example
