MR50A(Blades sold separately) |
|
Effective when a great deal of strength is required. |
|
MP55A is the boosted-up version of MR50A. |
|
|
MP55A(Blades sold separately) |
Use these cutters to cut through thick iron and lead wires, or to
perform a tight caulk. They are the most powerful power cutters, and
they have the thickest cylinder amongst all power cutters.
Model No. |
Overall length
(mm) |
Weight
(g) |
Diameter
(mm) |
Air pressure
(N) |
MR50A |
239 |
1290 |
75 |
4704 |
MP55A |
372 |
2000 |
75 |
7742 |
*Refer to the page on "Standard Blades" for the shapes of standard blades. |
*The same standard blades can be used for both MR50A and
MP55A. |
Model No. |
Blade No. |
Material |
Cutting capacity
(Diameter=mm) |
MR50A |
S120 |
Copper |
5.5 |
S120S |
Copper |
5.5 |
P120 |
Steel |
4.5 |
CR120 |
Steel |
4.5 |
EP120 |
Steel |
4.5 |
Z120 |
Piano wire |
1.6 |
MP55A |
F120 |
Plastics |
11.0 |
P120 |
Steel |
5.0 |
CR120 |
Steel |
5.0 |
EP120 |
Steel |
5.0 |
Z120 |
Piano wire |
2.0 |
Model No. |
Blade No. |
Crimping capacity |
MR50A |
A120-5.5 |
Solderiess terminal non insulated 5.5sq |
AR120-5.5 |
Connector 5.5sq |
MP55A |
A120-8.0 |
Solderiess terminal non insulated 8.0sq |
A120-14.0 |
Solderiess terminal non insulated 14.0sq |
AR120-8.0 |
Connector 8.0sq |
|